High density hydraulic operated paving block making machines are manufactured from high grade steel alloy and have a production capacity of 40-50 strokes per hour and have the following features:

• Pressing Capacity- 75 To 100 Tons
• Motor- 5 Hp 3 Phase 1440 Rpm per stroke
• Total Weight- 2.5 Tons (Approx)

We offer high quality of mosaic paver machines.

• Type : Hydraulic
• Motor : 5HP or 3 HP
• Pressing Ton Capacity : 1 to 25 Tons
• Oil Tank Capacity : 30 Liters
• Hydraulic Oil : System 68 Grade
• Operations Per Day 1000nos
• Weight : 1 Ton (App)
• Hydraulic Mosaic and paving block making machine with 3HD motor

We offer a wide spectrum of paver machines widely used for building high quality bricks and blocks. The motor HP may vary from 3 HP to 5 HP and the pressing ton capacity is 1-25 tons with oil tank. The machine can be custom made to suit the requirement of the client.

Manufactured from 60mm OD tube for outer and 48mm OD tube for inner part.
Use: For supporting Beams, Slabs etc.

Model : AP - 1

• Min. Height (mtr) : 2.00
• Height (mtr) : 3.55
• Load Closed (Kg) : 3000
• Capacity Extended (Kg) : 2000

Model : AP - 2

• Min. Height (mtr) : 2.00
• Height (mtr) : 3.75
• Load Closed (Kg) : 3000
• Capacity Extended (Kg) : 2000

Model : AP - 3

• Min. Height (mtr) : 2.30
• Height (mtr) : 4.00
• Load Closed (Kg) : 2750
• Capacity Extended (Kg) : 1750

Model : AP - 4

• Min. Height (mtr) : 3.00
• Height (mtr) : 4.65
• Load Closed (Kg) : 2500
• Capacity Extended (Kg) : 1250

Manufactured from 14 gauge (2mm) M.S. Sheet, 10 M.M.M.S., rod etc. in two parts to slide and lock in any position.
Use: To support Centering Plate/ Floor Forms etc. without any intermediate supports.

• Minimum Size : 2.45m
• Maximum Size : 4.15m

Manufactured from 14 gauge (2mm) M.S.Sheet pressed on four sides and stiffened also.
Use: To Cast Floors, Beam etc.

Standard Sizes cm:

• 115 x 60
• 90 x 60

Manufactured from 14 gauge (2mm) M.S.Sheet
pressed on one side.
Use: To fill the gap after laying centering plates.

Standard Sizes cm:

• 115 x 35
• 90 x 35

Manufactured from 48mm OD / 42 OD tubes for frames and 27mm OD tubes for cross braces.
Use: Light model is available for plastering, painting etc. for medium heights. Heavy model is available for multipurpose uses like supporting slabs, beams etc. and plastering and painting purposes too.

Standard Size:

• Frame Width : 1000mm
• Frame Height : 2000mm
• Spacing Between Frames : 2250mm

We are a renowned manufacturer and exporter of premium quality scaffolding APS model. Manufactured in compliance with international quality standards, these type of scaffolding is extensively used in construction industry, engineering industry etc. Highly durable and reliable, we also offer these in different dimensions and can get them custom designed in accordance with clients' requirements.

Manufactured from 16 gauge M.S.Sheets, M.S Angles. Flatts of suitable size for various sizes.
Use: to cast concrete columns

Standard Sizes in cms:

• 45 x 23 x 150
• 45 x 23 x 150
• 45 x 23 x 250

Manufactured from 16 gauge M.S.Sheets, Angles, Pipes, Air inflated Tyres etc.
Use: To transport concrete mix on lift and on ground.

Standard Sizes:

• No. of Wheels : 2.5
• Capacity CFT : 4.5